Wastehero
Part of WasteOS · the route in the cab · iOS and Android

Turn-by-turn navigation built for the cab.

Give every crew a navigation app made for collection, not commuting. It guides drivers stop by stop through their assigned route, lets them log exceptions and proof of service without leaving the vehicle, and keeps the office updated in real time. Available on iOS and Android.

See it on one of your routes See what the crew sees Bring your most skeptical driver.
A minute in the cab: the next turn, the stop confirmed, the office in sync. Faithful recreation on demonstration data.
Route N-4 · Tuesday 13 of 26 done GPS · live
Continue 400 m on Ringvej
Stop 14 · Birkevej 4 · ETA 09:41
Arrived · task
Stop 14 · Birkevej 4
2 × 660L residual · access from the yard side
Confirm liftLift confirmed
Synced to the office · just now
Today · 26 stops · in order
12Ringvej 8Done 09:12
13Ringvej 22Done 09:26
15Solbakken 2UpcomingNext
+Havnegade 9Added
16Møllevej 18Upcoming
Re-dispatched from the control room · slotted in order
Works offline · syncs when back in range
Measured, not promised: the platform’s own running totals
0
crew hours run through the driver app
0
routes planned on the platform
0
bins under management
Platform totals across WasteHero operations, not projections. When your crews run the app, the numbers on the screen are your own.
The problem

A paper route list, a consumer sat-nav, and a phone that never stops ringing.

A collection route is not a commute. The sat-nav does not know your stops, the paper list does not know the traffic, and the office does not know anything until the crew gets back. The Navigation App puts the whole shift on one screen in the cab.

It thinks in stops, not addresses

Consumer sat-navs know streets. The driver app knows stops, containers, access notes, and the order the route was planned in.

Safe by design

Built with drivers, for the realities of a route: gloves on, engine running, patchy signal. Big touch targets, voice guidance, and a hands-light flow keep the driver’s attention on the road.

The office knows the moment it happens

Every update reaches the office and, where relevant, the customer the moment it happens. No end-of-day paperwork.

What it does

Made for the cab, not the commute

Guidance, task collection, and proof of service in one app your crews can run with gloves on.

01
Turn-by-turn guidance

Every stop, in order, straight to the cab

The driver opens the app and sees today’s route already sequenced. Voice-guided, turn-by-turn directions take them to each container without a paper list or a second sat-nav on the dashboard.

Today’s route · already in order
Stop 12 · Ringvej 8done 09:12
Stop 13 · Ringvej 22done 09:26
Stop 14 · Birkevej 4 · 2 × 660Lnext · voice guided
Stop 15 · Solbakken 2 · note: gate codequeued
02
Task collection

Confirm the collection without stopping the shift

Each stop shows what to collect and any notes about access or the container. Drivers mark a task done, flag a container as blocked or contaminated, and move on. Every action lands on the shared record instantly.

Stop 22 · Harbour Road 41
1 × 1100L cardboard · gate code on the record
Done
Blocked
Not out
Blocked, contaminated, not out: flag it with one tap and a reason code, no typing required.
03
Proof of service

Capture the evidence on the spot

A blocked bin, a contaminated load, a bin left out. The driver snaps a photo and adds a reason code from the cab. The office and the customer see it immediately, so disputes are settled with evidence, not memory.

Exception · Birkevej 4
09:43 · geotagged
Photo attached from the cab09:43
Reason code · access blockedone tap
Office and customer notifiedon the record
04
Works offline

A dead zone never stops the shift

The route runs without signal and syncs automatically the moment connection returns. Collections, exceptions, and photos are stored on the device, so nothing is lost between the dead zone and the depot.

Dead zone · updates stored on the device
09:41Lift confirmed · Stop 14stored
09:44Blocked + photo · Stop 15stored
09:49Lift confirmed · Stop 16stored
09:52Signal backsynced · nothing lost
A shift, start to finish

What the app does across the working day

From the first stop to the last, the driver app keeps the crew moving and the office informed.

1

Receive the route

The driver logs in and the day’s optimized route is already loaded, in order, with every stop and its notes.

2

Drive stop to stop

Turn-by-turn guidance takes the crew to each container, re-routing live around closures and traffic.

3

Collect and record

Mark each task done, or flag an exception with a photo and reason code, without leaving the cab.

4

Sync in real time

Every update reaches the office and, where relevant, the customer the moment it happens. No end-of-day paperwork.

One app, three points of view

Built for the whole crew, not just the driver

The same live route seen from the cab, the dispatch desk, and the back office.

Driver

The driver sees only today

Just this shift’s route, in order, with clear guidance to the next stop and a fast way to flag anything unusual.

  • Voice turn-by-turn to every stop
  • One-tap exceptions with photo evidence
  • Works offline and catches up when signal returns
Dispatcher

The dispatcher sees the fleet live

Where every vehicle is, which stops are done, and which are running behind, all on one map as it happens.

  • Live vehicle and progress tracking
  • Reassign or add a stop mid-shift
  • Spot delays before customers call
Office

The office sees the record

Every collection, exception, and photo lands on the shared record automatically, ready for billing, reporting, and customer answers.

  • Instant proof of service for disputes
  • Automatic customer notifications
  • No paper to chase at the end of the day
By design

What the driver app guarantees

No projected savings on this page. These are properties of how the app works, and the outcome numbers that matter will come from your own routes in the demo.

0
Of stops arrive in the cab sequenced, with their access notes
0
App for the whole shift: guidance, tasks, and proof of service
0
End-of-day paperwork: every action lands on the record as it happens
Questions we get

The practical stuff

What operators ask before they put the app in the cab.

What devices does the app run on? +
iOS and Android phones and rugged tablets. There is no proprietary hardware to buy; crews can use the devices they already carry, and the app is built for use with gloves on and the engine running.
What happens when drivers lose signal? +
The route keeps working offline. Collections, exceptions, and photos are stored on the device and sync automatically the moment the connection returns, so a dead zone never stops a shift or loses data.
Where do the routes come from? +
Routes are planned in WasteHero and dispatched straight to the app, in order. If you use route optimization, the app simply receives the optimized plan; there is nothing for the driver to set up.
How does the office see what happened? +
Every action a driver takes lands on the shared record in real time, so the office sees progress, exceptions, and proof of service as it happens, ready for billing and customer answers with no end-of-day data entry.
How much training do drivers need? +
Very little. The interface shows one stop at a time with large, obvious controls, and drivers learn it on the route rather than in a classroom. Onboarding is a walk-through of a live shift, not a course.

See the driver app on a real route.

We will walk a shift with you, from the first stop to the synced record in the office, so you can see exactly what your crews and dispatchers would use.

30 minutes · one of your own routes · no slides · no commitment.
Prefer email? hello@wastehero.io

Put it in one cab for a day
Opens your email with everything pre-filled. Nothing is sent behind your back.
Navigation App · the route, in the cab
30 minutes · one of your own routesBook a demo